PinSens Force Sensor Kistler Model 9204B
|
The outer diameter corresponds to the usual 1/2" x 1/8" mounting grooves. The sensor can be secured with the screw supplied. Although the mold cavity pressure in industrial applications is normally measured directly in the cavity, there are situations in which this is not possible, for exaple for reasons of space. PinSens is a cost-effective alternative in such cases. |
PinSens Force Sensor Kistler Model 9204B is a simply constructed force sensor for indirect mold cavity pressure measurement behind a measuring or ejector pin. The diameter of the measuring or ejector pin must be taken into account in the conversion from for to pressure.
 |