ThermoCOMP Quartz, Melt, Cylinder, OEM Pressure Sensors, Pressure Transmitters From Kistler

Site Search

ThermoCOMP® Quartz, Melt, Cylinder, OEM Pressure Sensors, Pressure Transmitters

ThermoCOMP Quartz Pressure Sensors,Melt Pressure Sensors,Cylinder Pressure Sensors,OEM Pressure Sensors,Pressure Transmitters,Kistler,ThermoCOMP,Quartz,Pressure,Sensors,Melt,Cylinder,OEM,Transmitters

PIEZOTRON® pressure sensors use the same quartz sensing element as standard (charge output) piezoelectric units and also include a miniature, built-in charge-to-voltage converter for low impedance voltage output. This allows the usage of general purpose cable in environments where moisture or contamination would be detrimental to the high insulation resistance required with high impedance sensors. PIEZOTRON pressure sensors generally have time constants long enough for calibration, but usually not long enough for static measurements. For this reason they are usually restricted to dynamic applications.

Kistler piezoresistive pressure sensors measure static and dynamic events with high accuracy and long-term stability. Kistler's comprehensive line includes general purpose, industrial and OEM sensors, along with specialty units for oil exploration, engine monitoring and liquid level sensing.

Kistler's sensors utilize three types of proven sensing elements:

(1) Oil filled silicon measuring cells
(2) Dry, high pressure/high temperature silicon SOI elements
(3) Ceramic sensors using thick film technology on a substrate.

The full scale pressure ranges cover 3 psi through 72,000 psi and temperatures from -50 to 570°F.

Piezoresistive transducers require constant current excitation provided by Kistler's signal conditions (refer to catalogue).

Piezoresistive transmitters require only voltage excitation for proper operation. Models are available in 2 or 3 wire configurations. Some versions not only provide pressure information, but can also measure temperature using appropriate Kistler amplifiers.

Kistler ThermoCOMP® Quartz Pressure Sensors	Back To Top
Kistler Model 6125B ThermoCOMP® Quartz Pressure Sensors Ground-Isolated high temperature pressure sensor for cylinder pressure measurements in internal combustion engines.
Kistler Model 6041A ThermoCOMP® Quartz Pressure Sensors Water-cooled precision cylinder pressure sensor with small dimensions, especially suited for small combustion engines and for thermodynamic investigations at the laboratory.
Kistler Model 6061B ThermoCOMP® Quartz Pressure Sensors Water-cooled precision cylinder pressure sensor with small dimensions, especially suited for small combustion engines and for thermodynamic investigations in the laboratory.
Kistler Model 7061B ThermoCOMP® Quartz Pressure Sensors Water-cooled precision pressure sensor specially suited for duty in internal combustion engines for high-precision thermodynamic measurements.
Kistler Model 6043A60 ThermoCOMP® Quartz Cylinder Pressure Probe Water-cooled measuring probe with very small dimensions and M8x0.75 mounting thread, especially suited for use in internal combustion engines with reduced volume and more than 2 valves per cylinder.
Kistler Pressure Sensors	Back To Top
Kistler Model 6067C Water-Cooled Precision Cylinder Pressure Sensors Water-cooled precision cylinder pressure sensor with small dimensions, especially suited for small combustion engines and for thermodynamic investigations in the laboratory.
Kistler Model 211B Miniature, High Sensitivity, Voltage Output Pressure Sensors The 211B Series are general purpose sensors that measure transient and repetitive dynamic events in a wide variety of applications.
Kistler Model 217C, 617C High Pressure, Ballistics Pressure Sensors The 217C and 617C sensors are specifically designed to measure high pressures in weapons development and munitions testing.
Kistler Model 4053A Piezoresistive Relative Pressure Sensors The piezoresistive pressure sensors measure static and dynamic relative pressures. They are distinguished by high output voltage, good linearity and stability together with small dimensions. Very dynamic measurements are also possible as a result of their high natural frequency.
Kistler Models 4043A, 4045A, 4073A, 4075A Piezoresistive Absolute Pressure Sensors Piezoresistive pressure sensors measure static and dynamic absolute pressure. They are distinguished by good linearity and high output voltage.
Kistler Melt Pressure Sensors	Back To Top
Kistler Models 4086A, 4087A Melt Pressure Sensors The sensor Type 4086A and 4087A allows constant measuring of the melt pressure during extrusion. Because no pressure transmitting medium such as mercury or oil is used, this sensor is ideal for all types of materials including foodstuffs and medical products.
Kistler Models 4096A, 4097A Melt Pressure Sensors The melt pressure sensor Type 4096A, 4097A allows constant measuring of the melt pressure during extrusion. Because no pressure transmitting medium such as mercury or oil is sued, this sensor is ideal for all types of materials including foodstuffs and medical products.
Kistler Models 6961A250, 6962B2000, 6963A8000 Reference Pressure Sensors These reference sensors are above all suitable to serve as Reference Standards in your calibration laboratory. Kistler recommends, in addition, their pressure generators and the pressure calibrator Type 6907B with its calibration software.
Kistler Cylinder Pressure Sensors	Back To Top
Kistler Model 6013C Cylinder Pressure Sensors Life expectancy optimized sensor for continuous cylinder pressure measurement in gas and diesel engines. Because of its low thermal shock and high stability over the long term, this sensor is suitable for difficult monitoring and control tasks for internal combustion engines.
Kistler Model 6613CA Cylinder Pressure Transmitters Sensor designed with optimum service life for continuous cylinder pressure monitoring in diesel and gas engines. Because of its low thermal shock and high stability over the long term, this sensor is suitable for demanding monitoring and control tasks.
Kistler Model 7621CQ Cylinder Pressure Transmitters Robust transmitter for continuous cylinder pressure monitoring of large engines, especially suitable for heavy fuel operation.
Kistler Pressure Transmitters	Back To Top
Kistler Model 4069A Pressure Transmitters Robust, cost-effective pressure transmitter for measuring pressure up to 4,000 bar. Suitable for application in hydraulic systems and fuel injection systems of Diesel engines.
Kistler Models 428xAE, 438xAE Pressure Transmitters These extremely versatile pressure transmitters are suitable for measuring dynamic and static pressures.
Kistler Ceraline-S Pressure Transmitters Ceraline-S pressure transmitters are extremely versatile and suitable for measuring dynamic and static pressures.
Kistler Model RTC28 Submersible Transmitters The Submersible Transmitters RTC28 measure and monitor liquid levels in industrial and communal hydrostatic applications.
Kistler Pressure Measuring Probes	Back To Top
Kistler Model 6053BB Miniature Pressure Measuring Probe The miniature measuring probe with very small dimensions and M5 x 0.5 mounting thread is particularly suitable for direct installation in small-capacity combustion engines with more than 2 valves per cylinder.
Kistler Model 6055BB Miniature Pressure Measuring Probe The miniature measuring probe with very small dimensions and M5 x 0.5 mounting thread is particularly suitable for direct installation in small-capacity combustion engines with more than 2 valves per cylinder.
Kistler Models 6057A80, 6057 Miniature Pressure Measuring Probe Miniature measuring probe for direct mounting or mounting in a glow plug adapter, resulting in an extremely short gas duct.
Kistler Pressure Measuring Chain	Back To Top
Kistler Models 4013A, 4015A Melt Pressure Measuring Chain Industrial measuring chain consisting of a melt pressure sensor with integrated cable, extension cable and an amplifier adjusted for the measurement of melt pressure up to 3,000 bar, with a nozzle temperature of up to 350C in the injection unit of injection molding machines.
Kistler Models 4079A Low-Pressure Measuring Chain Industrial measuring chain consisting of a pressure sensor with removable screw-on cable, and an amplifier adjusted for the measurement of pressure during the manufacture and processing of reactive polymers such as polyurethane's, silicones or epoxy resins.
Kistler Models 4090B, 4091B Extru-Sys Melt Pressure Measuring Chain The melt pressure measuring chain Type 4090/91B allows constant measuring of the melt pressure during extrusion. The unique silicon measuring chain, operating according to the piezoresistive principle, is located directly behind a solid, rugged diaphragm.
Kistler Pressure Transducers, Measuring Spark Plugs	Back To Top
Kistler Model 7261 Low Pressure Quartz Transducer Low pressure quartz transducer for dynamic and short term static pressure measurements from vacuum to 10 bar. High resonant frequency, flush welded diaphragm.
Kistler Model 6115A Pressure Measuring Spark Plug The measuring spark plug Type 6115A allows cylinder pressure measurements to be made without the need for a separate measuring bore. The measuring spark plug M12 x 1.25 incorporates a miniature piezoelectric pressure sensor.
Kistler Model 6117B Pressure Measuring Spark Plug The measuring spark plug allows a pressure measurement without a drilled hole. In the spark plug Type 6117B, is integrated the worlds smallest piezoelectric high temperature, cylinder pressure sensor.
Kistler Model 6829A Multi-Cavity Pressure Monitoring System Complete modular monitoring system for multi-cavity injection molds consisting of cavity pressure sensors and charge amplifier.
Kistler Model 6190A p-T-Sensors p-T-Sensor for mold cavity pressure up to 2000 bar and contact temperature in the cavity when injection molding plastics. Design without diaphragm but with flat front.
Kistler OEM Pressure Sensors	Back To Top
Kistler Model RHU50 High Pressure OEM Sensors Unlike many other pressure transducers, the Series RH high pressure/high temperature sensors can directly measure pressure in media up to 300°C/570°F.
Kistler Model RES19 OEM Pressure Sensors The RES19 OEM Pressure Sensors are particularly suitable for system and instrument manufacturers. They are versatile in applications and can be used to measure pressures from 20 to 1,000 bar absolute in liquids and gases in two temperature ranges between -40°C and 140°C.
Kistler Model RES15 OEM Pressure Sensors The RES15 OEM Pressure Sensors are particularly suitable for system and instrument manufacturers.
Kistler Models MER180, MER181 OEM Pressure Sensors Ceramet Ceramet is a piezoresistive sensor on a ceramic base. It is rugged, corrosion and abrasion resistant which makes it particularly suitable for industrial OEM applications.
Kistler Model FER18 OEM Pressure Sensors Ceralite Ceralite is a piezoresistive sensor on a ceramic base. It is rugged, corrosion and abrasion resistant which makes it particularly suitable for industrial OEM applications.
Kistler K-Line Pressure Transmitter	Back To Top
Kistler K-Line Pressure Transmitter These extremely versatile K-Line pressure transmitters are suitable for measuring dynamic and static pressures.