Kistler Quartz Cavity Pressure Sensor Model 6175A2
|
The Kistler Quartz Cavity Pressure Sensor Model 6175A2 consists of a high temperature quartz sensor built into a rugged adapter. The sensor has a front diameter of 8 mm, is flush with the front of the adapter, separated by a cylindrical gap of < 10 microns and measures the pressure directly. This acts on a quartz sensor element, which yields a proportional electrical charge. The temperature of the melt touching the front of the sensor must not exceed 850C. All parts of the sensor are corrosion-resistant. The high temperature non-detachable cable is protected by steel braiding and has a degree of protection IP65. The Fischer connector is self-locking and splashproof. |
Kistler Quartz Cavity Pressure Sensor Model 6175A2 for measuring cavity pressures up to 2000 bar when diecasting aluminum. Designed without diaphragm and with a flat, machinable front. This sensor must never be used for liquids and gases. Integrated high temperature cable with degree of protection IP65.
 |